Filtration Equipment
Vent Pure
Vent Odor Control Made Simple
GENERAL CARBON's VENT PURE is the ultimate design for the simple control of odors in passive vent systems. Each filter contains 10 pounds of activated carbon to help keep chemical odors from escaping from atmospheric vents, tanks and process equipment. A screw driver is all that is needed to install the VENT PURE . The filter comes complete with Neoprene sleeve and hose clamps. To install, simply slide the sleeve over the VENT PURE and vent pipe and tighten the hose clamps to keep everything in place. VENT PURE can also be provided with a flange.
Media replacement is a simple procedure. The 2 inch threaded plug is removed and the spent media is dumped out. The new media is then installed, and the plug screwed back into place.
VENT PURE units are made from PVC for chemical resistance and are available in upright and inverted models to match your vent design. Upright models come with stainless steel bug screen and rain hats. Standard pipe sizes for VENT PURE filters are 4, 6 and 8 inches. Other sizes are available upon request.
A full range of impregnated, specialty and catalytic carbons are also available for optimum chemical control.
Caution!
Wet activated carbon removes oxygen from air causing a severe hazard to workers inside carbon vessels. Confined space/low oxygen procedures should be put in place before any entry is made. Such procedures should comply with all applicable local, state and federal guidelines.
Activated Carbon MSDS
