Activated Carbons
GC Sulfursorb Plus
Catalytic Activated Carbon for H2S Treatment
GC Sulfursorb Plus is an non-impregnated, bituminous coal based catalytic activated carbon which has been specially developed for removing Hydrogen Sulfide and Sulfur compounds from air streams. It is well suited for use in sewage treatment plants and pumping stations where these compounds are typically found. GC Sulfursorb Plus gives you the high loading rates of impregnated carbons without the thermal risks associated with some chemically treated carbons.
Specifications
| Mesh Size : | 4x10 |
Less than No. 4, %: |
5(max) |
Greater than No. 10, %: |
10(max) |
| Mean Particle Diameter, mm: | 2.8 (avg) |
| Moisture, % (as packaged): | 8(max) |
| Typical Density, lbs./cu.ft.: | 25 |
| Typical Density, g/cc: | 0.40 |
| Hydrogen sulfide breakthrough capacity*, gH2S/cc carbon | 0.20(min) |
*H2S capacity is measured using ASTM standard method D6646-01. Testing requires passing a moist air stream containing 1% by volume H2S though an appropriately sized column (per ASTM requirements) packed with activated carbon and monitoring to a 50 ppmv H2S breakthrough. Results are reported as grams of H2S adsorbed per gram of activated carbon.
Standard packaging is in 40lb. or 500kg. bags. Other packaging is available upon request.
Caution!
Wet activated carbon removes oxygen from air causing a severe hazard to workers inside carbon vessels. Confined space/low oxygen procedures should be put in place before any entry is made. Such procedures should comply with all applicable local, state and federal guidelines.
Activated Carbon MSDS
