Filtration Equipment
Dorex2000s & 2000S2
Side Access Carbon Filters
Features
- High single-pass efficiency
- 500 ft/mn design velocity
- .25 wg resistance at 500 ft/mn
- Trays can be loaded or unloaded from either side of housing
- Units contain a two inch pre-filter track
- Standard trays are 14 gauge, cold rolled steel with a baked black enamel finish. Stainless steel, epoxy coated or plastic trays are optional.
- Units can be bolted directly together or stacked to fill individual needs.
Specifications
The 2000S and 2000S2 are side access housings which are used to treat high airflow rates containing limited levels of contaminates. They are both unique in design and versatility. Being modular in design, they can be bolted together or stacked like building blocks to fill various needs. While in this configuration, all filter tracks will align so the side-loading feature will not be lost. The 2000S2 is similar to the 2000S, but holds more carbon for increased removal capacity.
| Unit Designation | Number of Carbon Trays |
Rated Flow at .25 W.G. |
Lbs. of Carbon (Approximate) |
| 2000S | 20 | 2000 C.F.M. | 90 |
| 2000S2 | 8 | 2000 C.F.M. | 132 |
Caution!
Wet activated carbon removes oxygen from air causing a severe hazard to workers inside carbon vessels. Confined space/low oxygen procedures should be put in place before any entry is made. Such procedures should comply with all applicable local, state and federal guidelines.
Activated Carbon MSDS
